Skip to content
ReactionTestTime

Mouse Polling Rate Test

See how often mouse movement reaches your browser.

Runs in your browser · No sign-up

Move your mouse here

Press Start and move in smooth circles for about five seconds.

Keep moving inside the box. You don’t need to hold a button.

How to test your mouse polling rate

  1. Start the test

    Click Start and stay on this tab.

  2. Move continuously

    Move your mouse in wide, smooth circles inside the box. Keep moving until the result appears. Pauses can make the test take longer.

  3. Read the observed Hz

    Check your result in Hz. Read any note beside the number before comparing results.

  4. Repeat under the same conditions

    Use the same browser, connection and movement for each run. Change one setting at a time.

What your result means

The large number estimates how many movement updates reach this page each second. If your mouse software says 1,000 Hz and the test shows about 500 Hz, the page saw about 500 updates per second. Check your mouse software for its configured rate.

Use the chart to see how steady the reading was. If the test shows a warning or runs give different readings, try another run with smooth, continuous movement.

What is mouse polling rate?

Mouse polling rate, also called report rate, is how often your mouse is set to send updates to your computer. Hertz (Hz) means updates per second. At 1,000 Hz, your mouse is set to send an update every millisecond.

DPI is how many movement counts the mouse records per inch. Polling rate is how often it sends those counts. The table shows the expected time between reports for each setting.

Nominal mouse polling rates and report intervals
RateIntervalTypical context
125 Hz8 msBasic or power-saving setting
250 Hz4 msIntermediate setting
500 Hz2 msCommon gaming option
1,000 Hz1 msCommon gaming option
2,000 Hz0.5 msHigh-rate option
4,000 Hz0.25 msHigh-rate option
8,000 Hz0.125 msHigh-rate option

Why browsers can read lower than your mouse setting

Your browser may group several movement updates together. Moving slowly can also give the page fewer changes to count. If your result looks low, try smooth, continuous movement on the computer your mouse is connected to. Keep the same connection and browser for each run.

If your result matches your browser's frame rate

Some browsers pass along movement around the time they draw each frame. That can give a reading close to 60, 120, 144 or 240 Hz. The test checks how closely movement updates line up with frames before it flags that pattern.

Testing 2,000, 4,000 and 8,000 Hz mice

Use quick, smooth sweeps. If the browser makes individual movement updates available inside a group, the test counts them separately.

Repeat the test to compare settings on the same setup. Use a separate measurement tool to check the mouse’s actual report rate.

Does mouse polling rate affect reaction time?

A shorter report interval changes one part of the input path. A reaction test also includes your response, browser scheduling and display timing. See how site sessions are grouped on the device statistics page.

How this test measures

  1. Mouse movement
  2. OS input handling
  3. Browser pointer events
  4. This test counts events
The test observes the browser end of this path. Direct USB and HID reports require a separate measurement.
What we measure
The test counts individual movement updates when the browser provides them. Otherwise, it counts each group the browser sends.
Measurement limits
USB/HID packets, device settings, click latency and end-to-end response require other tools.
How it works
The test measures short stretches of steady movement. It usually reports the middle of those readings. If timing detail is limited, it can show an approximate average.
Your privacy
The trace and result stay in memory. With analytics consent, the site can send a tool usage event without timings, coordinates or exact rates.
Read the measurement methodology

Frequently asked questions

What is mouse polling rate?
It’s how often your mouse sends updates to your computer. A setting of 1,000 Hz means one update per millisecond.
Is 1,000 Hz a good polling rate?
If your mouse supports it, 1,000 Hz is a reasonable starting point for gaming. For your own setup, choose a rate that works consistently in the games and apps you use.
Why does my 1,000 Hz mouse show less than 1,000 Hz?
Your browser may group movement updates, and slow movement can give the page less to count. Try again with steady movement on the same connection.
Can this test verify 4,000 or 8,000 Hz?
The test reports the updates it receives from your browser. To confirm the mouse’s actual report rate, use a separate measurement tool.
What is the difference between DPI and polling rate?
DPI describes the relationship between physical movement and sensor counts. Polling rate describes how often the mouse reports.
Does polling rate affect input lag?
A shorter nominal report interval can reduce the wait for the next report. Click processing, buffering, rendering and display timing contribute separately.
Is wired faster than wireless?
Wired, proprietary receivers and Bluetooth can expose different settings on the same model. Compare the modes your device supports with the rest of your setup held constant.
Why does moving slowly change the result?
Slow movement can yield fewer observable position changes. Try broad, smooth sweeps and keep the cursor inside the measurement area.
How do I change my mouse polling rate?
Open the manufacturer’s mouse software and look for Polling Rate or Report Rate in the active profile. Choose a supported rate for your connection, save it, then rerun the test with the same browser and movement. Some mice use a hardware switch or a fixed rate; check your model’s manual.
Does this test upload mouse movement?
Mouse samples are processed in the current tab and are never uploaded. If you accept analytics, the site can send a tool usage event with broad result categories. It omits raw movement, timestamps and exact rates.
Can I use a touch screen or trackpad?
A trackpad can work if your browser reports it as mouse input. The test counts mouse and trackpad movement the same way when the browser labels both as mouse input. It skips events labeled as touch or pen.

Technical references